Ecoboost should you install oil catch can

Pre-fit the hose clamp onto the rubber hose on the turbo.

Install the 19mm hose onto the catch can.

Pre-fit the hose clamps onto the 19mm hose.

Fit the 16mm hose to the rocker cover (you may need to apply some oil to the hose the allow the hose clamp to slide over the barb on the rocker cover)Р В РІР‚СњР В РІР‚С›ttach the supplied reducer to the original rubber hose still mounted to the turbo air intake and fit the 19mm hose from the catch can to it.

Fit the 16mm hose to the stainless steel pipe on the catch can bracket to the rocker cover.

Pre-fit the hose clamps to the 16mm hose.

Remove the rubber hose from the rocker cover.

Remove the rubber hose and clamp from the rocker cover

Cover the pipe going into the turbo to stop debris entering the turbo whilst working.

Remove the bolt from the fixed hose on the pipe (from the rocker cover to the air intake pipe).

Remove the bolt for the fixed hose from the rocker cover to air intake

Intall the pre-assembled catch can to the inside of the guard using the existing fixed nuts.

Mount the catch can to the existing fixed nuts on the engine bay guard

Fit the hose clamps just past the barbs using pliers.

Attach the hose to the drip feed (apply some oil to the drip feed barb to make insertion easier).

Pre-install the hose clamps on the 12mm hose using pliers (put them about 300mm down the hose on both ends).

Attach the stainless steel bracket to the catch can, ensuring the hole in the catch can lines up with the pipe on the bracket.

ProVent catch can pre-assembled for fitting to Toyota Hilux turbo diesel

Here is my step by step guide on installing the Direction-Plus ProVent Catch Can kit to a 2013 Turbo Diesel Toyota Hilux. Highly recommend this install for any DIYer.Р В РІР‚СњР вЂ™Р’В«elow is the YouTube video I made whilst installing mine on a 2013 Toyota Hilux: The hardest part was getting the hose clamps over the barbs after installing the hose. I installed my catch can with relative ease and it was probably done in about 45 mins (I was videoing so it did actually take longer). The kit is complete and easy enough for any one that likes to get there hands dirty to install.Р В РІР‚СњР В РІР‚РЋind your nearest ProVent dealer here: Installation of Catch Can It is also the kit sold by leading diesel shops and repairs. I considered the ProVent Catch Can Kit the most comprehensive and highest quality. The catch can filters out the oil vapors from the vent allowing clean air to pass through to the intake system.Р В РІР‚СњР В РІР‚С›fter a lot of research I ended up purchasing a Direction-Plus ProVent Catch Can Kit from Berrima Diesel (I am not affiliated with Berrima Diesel). If you crash your truck whilst towing all your gear and have an accident you may risk jeopardise your insurance claim. Leaving your intake operating at maximum flow and maximum power.Р В РІР‚СњР вЂ™Р’В«locking off an EGR valve is illegal, although there are many that would consider doing this as well. This causes slug and gunk to build up on the intake of your turbo diesel, until the point the engine is choked.Р В РІР‚СњР вЂ™Р’В«y separating the oil from the intake the exhaust gas can pass through dry. The problem occurs where the oil vapor mix with the exhaust gas. This dilutes the amount of oxygen with inert gases, to help reduce combustion heat in the cylinders.Р В РІР‚СњР вЂ™Р’В®xhaust gases contain carbons and soot, which on their own donР В Р вЂ Р В РІР‚С™Р Р†РІР‚С›РЎС›t do much. The EGR recirculates some of the exhaust gas back into the intake. Part of the emission controls is the EGR Р В Р вЂ Р В РІР‚С™Р Р†Р вЂљРЎС™ exhaust gas re-circulation. This was not much of a problem in the past, but now with modern emission controls things have changed. Classic oil leak from oil vapors on turbo air outletР В РІР‚СњР В РІР‚С› tell tail of this is oil leaking from the under side of rubber hose on the turbo. Turbos create more pressure and therefore more oil vapor. This forces oil vapor into the intake system.

The rocker cover is also vented to the intake system of the vehicle. Oil vaporsР В РІР‚СњР вЂ™Р’В®ngines have a PCV valve that vents blow-by gas from crank case to the rocker. We discuss why you should do it and show how simple it is to install. Installing an oil catch can on your Turbo Diesel is a must. Why should you install an oil catch can to your Turbo Diesel 4Р В РІР‚СљР Р†Р вЂљРІР‚Сњ4?

Ecoboost should you install oil catch can